08-08-2018, 05:46 AM
Greetings to all!
I have recently acquired a R12R Reverberocket with 6v6 power tubes and a tube rectifier. The previous owner changed out both transformers. He replaced them with sruff he had laying around vy the looks of it. I would like to put it back to stoxk, but I am having a problem picking a PT.
my issue is: according to the schematic, B+ should be no more than 350v. According to Mercury Magnetics and heyboer who make replacement transformers. They are 370-0-370. Which would net a much higher B+.
anyone know what the original specs are supposed to be for the PT? Or, anyone familiar with voltages and current for this xircuut.?
I am inxluding a dile with the schematic. The file contains 2 circuits. Mine is the lower one.
Thanks
I have recently acquired a R12R Reverberocket with 6v6 power tubes and a tube rectifier. The previous owner changed out both transformers. He replaced them with sruff he had laying around vy the looks of it. I would like to put it back to stoxk, but I am having a problem picking a PT.
my issue is: according to the schematic, B+ should be no more than 350v. According to Mercury Magnetics and heyboer who make replacement transformers. They are 370-0-370. Which would net a much higher B+.
anyone know what the original specs are supposed to be for the PT? Or, anyone familiar with voltages and current for this xircuut.?
I am inxluding a dile with the schematic. The file contains 2 circuits. Mine is the lower one.
Thanks