11-08-2014, 09:53 AM
As Coach Lombardi said: "When all else fails, go back to the basics. Cables is one of them.
(11-07-2014, 10:21 AM)beedoola Wrote:(11-06-2014, 02:06 PM)Hangman Wrote: hmm, could be a lot of things.
Did you end up setting your bias a little higher than the roughly 19ma per tube you were initially experiencing?
if there is enough crossover distortion that can certainly become audible.
do you have a scope? can you feed the input a 1k sine wave, plug the amp into a dummy load and view the output on the scope?
No, I left the bias stock.
The problem ended up being the instrument cable! I thought initially it was an issue with my pedalboard so I took everything out of my chain except guitar and cable but it was that cable that was causing it!
I also used a little Deoixt Gold G5 on the rockers. I'm not 100% sure, but that may have fixed the issue with the Treble Control/Treble Rocker.