This is just a picture of the recap job performed by my friend and coworker Cooper Smith at American Music in Seattle.
![[Image: VT40a.jpg]](http://www.vintageampeg.com/wp-content/uploads/2013/01/VT40a.jpg)
The capacitors for the screen supply and one of the 3 40uf caps that are used in the preamp section were all put on one turret board and mounted above the transformer.
there is enough clearance to do this in the later vt-40s or any of the v-2s. Something to consider if you have one and want to recap it.
The capacitors for the screen supply and one of the 3 40uf caps that are used in the preamp section were all put on one turret board and mounted above the transformer.
there is enough clearance to do this in the later vt-40s or any of the v-2s. Something to consider if you have one and want to recap it.