02-27-2015, 07:15 AM
(This post was last modified: 02-27-2015, 07:17 AM by cthendrico.)
(02-24-2015, 10:26 PM)Hangman Wrote: Green is positive, black is ground, at least thats what the schematic says.
Well my wiring was all screwed up then. So let me try to get some clarification. If I wanted to install a new speaker Jack to the chassis. I would just need to run Green to the tip and black to the sleeve and that would allow me to use a 16 ohm Cab out of my new Jack and another 16 ohm Cab out of the existing extension speaker Jack?
(02-27-2015, 07:15 AM)cthendrico Wrote:(02-24-2015, 10:26 PM)Hangman Wrote: Green is positive, black is ground, at least thats what the schematic says.
Well my wiring was all screwed up then. So let me try to get some clarification. If I wanted to install a new speaker Jack to the chassis. I would just need to run Green to the tip and black to the sleeve and that would allow me to use a 16 ohm Cab out of my new Jack and another 16 ohm Cab out of the existing extension speaker Jack?
Also were you looking at the free info society link or the picture of the factory schematic glued to my chassis I posted?