02-28-2015, 08:57 PM
Ok so I have a confession. I have spent the last 2 weekends building a head box for this gv22. I'm doing it because I have a miserably bad back and the combo with altec speakers was killing me. I built the box a little taller to facilitate the reverb unit on the bottom of the head box. I didn't want to say anything because people might chastise me for changing a vintage unit. (see below for picture)
THE ONLY thing I have left is wiring it to accept a speaker cab and not be hardwired to the speakers. What I was hoping to do is drill a 1/4 hole in the chassis and install a mono socket and take the green wire and solder it to the tip terminal and the black wire to the sleeve terminal.
I am LITERALLY sitting here with a drill bit in my hand waiting to see if based on the schematics above this will work to give me the ability to plug a 16 Colm speaker cab into my new jack and still be able to use the auxiliary cab jack as well. I don't want to drill unless it will work. PLEASE HELP!
THE ONLY thing I have left is wiring it to accept a speaker cab and not be hardwired to the speakers. What I was hoping to do is drill a 1/4 hole in the chassis and install a mono socket and take the green wire and solder it to the tip terminal and the black wire to the sleeve terminal.
I am LITERALLY sitting here with a drill bit in my hand waiting to see if based on the schematics above this will work to give me the ability to plug a 16 Colm speaker cab into my new jack and still be able to use the auxiliary cab jack as well. I don't want to drill unless it will work. PLEASE HELP!