03-03-2016, 10:23 AM
Ampeg V4B
C106 & C112 Cathode Bypass Caps.
They list as 6.8uF and polarized. According to that value I would assume they have to be electrolytic.
The ones on the board are very small black plastic rectangle types.
Certainly don't look electrolytic.
here is an image i found online.
On the far right top corner you can see black caps.
Those are the ones I am talking about.
http://www.talkbass.com/attachments/74-v...pg.522401/
I ask because I am replacing most of the caps in the amp and especially since they are supposedly electrolytic I wanted to replace while im in there. Unless they aren't worth messing with.
anyone know the scoop on those caps?
Thanks,
C106 & C112 Cathode Bypass Caps.
They list as 6.8uF and polarized. According to that value I would assume they have to be electrolytic.
The ones on the board are very small black plastic rectangle types.
Certainly don't look electrolytic.
here is an image i found online.
On the far right top corner you can see black caps.
Those are the ones I am talking about.
http://www.talkbass.com/attachments/74-v...pg.522401/
I ask because I am replacing most of the caps in the amp and especially since they are supposedly electrolytic I wanted to replace while im in there. Unless they aren't worth messing with.
anyone know the scoop on those caps?
Thanks,