Cathode Bypass Caps C106 & C112 - Electrolytic?

[Roman Ships]

Yep.

They're in V4*B* amps circuits only and at that, they're for the ultra-low circuitry. They're cathode caps at a certain value for a low-mid bump, when combined with the other circuitry in the ultra-low.

Do you use the ultra low? I mean, by all means, replace them if you feel the need, because as you said - you'll be in there (and getting at that board IS a bit of a time-suck when you need to get at it for anything).

But that's the scoop.

Thanks ! So is the value not super critical? That is, 8uF might ok? 8 uF electrolytics seem easier to find than 6.8.