08-10-2016, 03:30 PM
Good advise. I will just leave alone for now, do the important stuff and have a listen!
Yes the unsoldered tags are for the foot switch. Amazing that slipped by
I'm gonna do
F&T 50/50uf @500v (replace the multi can)
F&T 30uf @500v (2 of them zip tied into old 20/20 bracket)
F&T 100/100uf @500 (use one section, make a bracket to mount on original multi-can bolts, inside chassis)
that will keep em all at 500v if the 100uf can is too big for my bracket idea I'll do a Sprague Atom 80uf @ 450v
and of course the 3x 25uf @25v.
will post results
Doug
Yes the unsoldered tags are for the foot switch. Amazing that slipped by
I'm gonna do
F&T 50/50uf @500v (replace the multi can)
F&T 30uf @500v (2 of them zip tied into old 20/20 bracket)
F&T 100/100uf @500 (use one section, make a bracket to mount on original multi-can bolts, inside chassis)
that will keep em all at 500v if the 100uf can is too big for my bracket idea I'll do a Sprague Atom 80uf @ 450v
and of course the 3x 25uf @25v.
will post results
Doug