05-21-2017, 05:21 PM
Ok so It's not the OT - After disconnecting the OT promary leads from the circuit and rechecking, It has same resistance as before on the primary side on Red to Blue Red to Brown.
And there is no reading on the Red/Blue or Brown to ground as well as the Primary leads to Secondary leads. So I think it's OK
Next step is pulling the diodes and checking them out of circuit specifically D7 - D10.
Stay tuned up.
And there is no reading on the Red/Blue or Brown to ground as well as the Primary leads to Secondary leads. So I think it's OK
Next step is pulling the diodes and checking them out of circuit specifically D7 - D10.
Stay tuned up.