12-07-2017, 07:20 AM
(12-04-2017, 12:00 PM)vibrating string Wrote: I get lots of sound at volume setting 2-3, so maybe increasing the bias resistors would not hurt
Fiddling with the power tube bias is not going to change this. The bias just determines when the power tubes will distort, and what it sounds like when they do. What you describe is just a volume pot thing. Maybe it has a linear pot and you could replace it with an audio taper?
(12-04-2017, 12:00 PM)vibrating string Wrote: Also, I am pretty certain that the speaker is original. I might shop around for a nice recone kit or a replacement.
I'm kinda impressed that you would consider doing this yourself. If you proceed, please describe your experience?