The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 907 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 907 errorHandler->error




Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
V4 fixed bias
#1
I have a 74 VT22 and a 72 V4B. I just received a bias probe from Eurotubes so that I could see if the bias resistors are still holding up. I have a NOS quad of Sylvanias ready to go in one of the amps, but I definitely want to make sure all is well before sliding them in to one of these (prob the vt22)

Anyway, I set the meter as instructed for DCA 200ma. The results after some fluctuating some:

VT22 - 23.5

V4B - 29.8

Which one is in spec? I assumed they would both be the same since they're basically the same amp. The VT22 fluctuated down for a minute or two before settling in the 23.5 range. The V4B went down and then back up to 29.8.

hangman??
Reply


Messages In This Thread
V4 fixed bias - by Denton - 06-27-2014, 11:57 AM
RE: V4 fixed bias - by Hangman - 06-27-2014, 10:41 PM

Forum Jump:


Users browsing this thread: 2 Guest(s)