3 prong plug conversion

[Bmhanner]

Actually, in reviewing the schematic it seems I would wire this just the way it was originally, with the following exceptions:

1. Remove wire going to "Death Cap" and the cap itself
   
2. Rewire the Ground switch to move the black wire to where the Death Cap was
   
3. Add a jumper from the top of the ground switch (with the white wire from the new AC cable and the black wire from the transformer) to the bottom, so no matter which position the ground switch is in, the white wire is always selected
   
4. Attach green ground from new AC cable to chassis
   

Does this sound right?