06-18-2021, 12:49 PM
Boris,
The clean signal coming from the preamp out is not alone surprising. This is how these amps are. the breakup all comes from the power stage.
Can you increase the height of the track you captured with the IR? make it nice and big, then lets do a horizontal zoom and lets see what the waveform looks like.
if you have a tone generator (or you can download one for your smartphone) then turn the V2 volume control half way up, and increase the tone generator volume until it starts to distort. Then push the tone generator volume up a little further and lets see what that looks like.
-Steve
The clean signal coming from the preamp out is not alone surprising. This is how these amps are. the breakup all comes from the power stage.
Can you increase the height of the track you captured with the IR? make it nice and big, then lets do a horizontal zoom and lets see what the waveform looks like.
if you have a tone generator (or you can download one for your smartphone) then turn the V2 volume control half way up, and increase the tone generator volume until it starts to distort. Then push the tone generator volume up a little further and lets see what that looks like.
-Steve