08-07-2021, 12:12 AM
Hi ElectroNerd,
I don't remember the resistance exactly, but it should definitely be above 0.062ohms. something in the tens of ohms 20-80 would be my rough estimate.
Check the flyback diodes (D7-D10) these are sacrificial devices that will short if the flyback voltage goes too high, this results in the fuse blowing. if the fuse doesn't blow, its unlikely that these are the culprit, but I thought I'd mention it just in case.
-Hangman
I don't remember the resistance exactly, but it should definitely be above 0.062ohms. something in the tens of ohms 20-80 would be my rough estimate.
Check the flyback diodes (D7-D10) these are sacrificial devices that will short if the flyback voltage goes too high, this results in the fuse blowing. if the fuse doesn't blow, its unlikely that these are the culprit, but I thought I'd mention it just in case.
-Hangman