Ok, I don't have the wire on hand, though I need to go buy some caps at a local store. If it's not totally necessary then I won't replace all the wire.
Another question: In the first picture above. The two brown wires coming off the top filter cap - with the 100k resistor. One of the wires goes to the series diodes that go to R40/45, and R39/46. The brown wire that goes to one end of the stand-by switch and the D1-4.
Do I keep those wires together when I redo that caps? - like in the picture below with the redone caps. Only in the picture below, there is only one brown wire going to the new cap. I don't have any clear pictures that show where the diodes went in the V4 I no longer have.
Another question: In the first picture above. The two brown wires coming off the top filter cap - with the 100k resistor. One of the wires goes to the series diodes that go to R40/45, and R39/46. The brown wire that goes to one end of the stand-by switch and the D1-4.
Do I keep those wires together when I redo that caps? - like in the picture below with the redone caps. Only in the picture below, there is only one brown wire going to the new cap. I don't have any clear pictures that show where the diodes went in the V4 I no longer have.