10-10-2014, 01:10 PM
Cook, I'll just remove them.
For the can caps, its 100uf towards the rear of the chassis and a 50/50 above it, correct?
Its been awhile since I did a recap. I already installed the 50/50 cap and 47uf on the right side.
I was going to do the same thing as in the second picture above (the pic with the thicker gauge wire).
For the can caps, its 100uf towards the rear of the chassis and a 50/50 above it, correct?
Its been awhile since I did a recap. I already installed the 50/50 cap and 47uf on the right side.
I was going to do the same thing as in the second picture above (the pic with the thicker gauge wire).